* lisp/info.el (Info-default-directory-list): Move here from paths.el.
* lisp/paths.el: Remove file, which is now empty.
* lisp/loadup.el: No longer load "paths".
* src/lisp.mk (lisp): Remove paths.elc.
* lib-src/makefile.w32-in (lisp2): Remove paths.el.
* INSTALL: Remove references to paths.el.
+2012-06-27 Glenn Morris <rgm@gnu.org>
+
+ * INSTALL: Remove references to paths.el.
+
2012-06-26 Eli Zaretskii <eliz@gnu.org>
* lib/makefile.w32-in ($(GNULIBOBJS)): Depend on stamp_BLD. This
to the real source directory--there is no need, and installation will
fail.)
-4) Look at `./lisp/paths.el'; if some of those values are not right
-for your system, set up the file `./lisp/site-init.el' with Emacs
-Lisp code to override them; it is not a good idea to edit paths.el
-itself. YOU MUST USE THE LISP FUNCTION `setq' TO ASSIGN VALUES,
-rather than `defvar', as used by `./lisp/paths.el'. For example,
+4) Put into `./lisp/site-init.el' or `./lisp/site-load.el' any Emacs
+Lisp code you want Emacs to load before it is dumped out. Use
+site-load.el for additional libraries if you arrange for their
+documentation strings to be in the etc/DOC file (see
+src/Makefile.in if you wish to figure out how to do that). For all
+else, use site-init.el. Do not load byte-compiled code which
+was built with a non-nil value of `byte-compile-dynamic'.
+
+It is not a good idea to edit the normal .el files that come with Emacs.
+Instead, use a file like site-init.el to change settings.
+
+To change the value of a variable that is already defined in Emacs,
+you should use the Lisp function `setq', not `defvar'. For example,
(setq news-inews-program "/usr/bin/inews")
variable should have. If you don't pay attention to what you are
doing, you'll make a mistake.
-5) Put into `./lisp/site-init.el' or `./lisp/site-load.el' any Emacs
-Lisp code you want Emacs to load before it is dumped out. Use
-site-load.el for additional libraries if you arrange for their
-documentation strings to be in the etc/DOC file (see
-src/Makefile.in if you wish to figure out how to do that). For all
-else, use site-init.el. Do not load byte-compiled code which
-was built with a non-nil value of `byte-compile-dynamic'.
-
If you set load-path to a different value in site-init.el or
site-load.el, Emacs will use *precisely* that value when it starts up
again. If you do this, you are on your own!
The `site-*.el' files are nonexistent in the distribution. You do not
need to create them if you have nothing to put in them.
-6) Refer to the file `./etc/TERMS' for information on fields you may
+5) Refer to the file `./etc/TERMS' for information on fields you may
wish to add to various termcap entries. (This is unlikely to be necessary.)
-7) Run `make' in the top directory of the Emacs distribution to finish
+6) Run `make' in the top directory of the Emacs distribution to finish
building Emacs in the standard way. The final executable file is
named `src/emacs'. You can execute this file "in place" without
copying it, if you wish; then it automatically uses the sibling
the command. See the section below called `MAKE VARIABLES' for more
information on this.
-8) Check the file `dir' in your site's info directory (usually
+7) Check the file `dir' in your site's info directory (usually
/usr/local/share/info) to make sure that it has a menu entry for the
Emacs info files.
-9) If your system uses lock files to interlock access to mailer inbox files,
+8) If your system uses lock files to interlock access to mailer inbox files,
then you might need to make the movemail program setuid or setgid
to enable it to write the lock files. We believe this is safe.
-10) You are done! You can remove executables and object files from
+9) You are done! You can remove executables and object files from
the build directory by typing `make clean'. To also remove the files
that `configure' created (so you can compile Emacs for a different
configuration), type `make distclean'. If you don't need some, or all
used in building Emacs, and are not needed any more.
2) Copy the files in `./info' to the place specified in
-`./lisp/site-init.el' or `./lisp/paths.el'. Note that if the
+`./lisp/site-init.el' or `./lisp/info.el'. Note that if the
destination directory already contains a file named `dir', you
probably don't want to replace it with the `dir' file in the Emacs
distribution. Instead, you should make sure that the existing `dir'
+2012-06-27 Glenn Morris <rgm@gnu.org>
+
+ * makefile.w32-in (lisp2): Remove paths.el.
+
2012-06-26 Paul Eggert <eggert@cs.ucla.edu>
Clean out last vestiges of the old HAVE_CONFIG_H stuff.
$(lispsource)language/georgian.el \
$(lispsource)language/khmer.el \
$(lispsource)language/burmese.el \
- $(lispsource)paths.el \
$(lispsource)register.elc \
$(lispsource)replace.elc \
$(lispsource)simple.elc \
2012-06-27 Glenn Morris <rgm@gnu.org>
+ * info.el (Info-default-directory-list): Move here from paths.el.
+ * paths.el: Remove file, which is now empty.
+ * loadup.el: No longer load "paths".
+
* custom.el (custom-initialize-delay): Doc fix.
* eshell/em-alias.el, eshell/em-banner.el, eshell/em-basic.el:
"Face for Info nodes in a node header."
:group 'info)
+;; This is a defcustom largely so that we can get the benefit
+;; of custom-initialize-delay. Perhaps it would work to make it a
+;; defvar and explicitly give it a standard-value property, and
+;; call custom-initialize-delay on it.
+;; The progn forces the autoloader to include the whole thing, not
+;; just an abbreviated version.
+;;;###autoload
+(progn
+(defcustom Info-default-directory-list
+ (let* ((config-dir
+ (file-name-as-directory
+ ;; Self-contained NS build with info/ in the app-bundle.
+ (or (and (featurep 'ns)
+ (let ((dir (expand-file-name "../info" data-directory)))
+ (if (file-directory-p dir) dir)))
+ configure-info-directory)))
+ (prefixes
+ ;; Directory trees in which to look for info subdirectories
+ (prune-directory-list '("/usr/local/" "/usr/" "/opt/" "/")))
+ (suffixes
+ ;; Subdirectories in each directory tree that may contain info
+ ;; directories. Most of these are rather outdated.
+ ;; It ought to be fine to stop checking the "emacs" ones now,
+ ;; since this is Emacs and we have not installed info files
+ ;; into such directories for a looong time...
+ '("share/" "" "gnu/" "gnu/lib/" "gnu/lib/emacs/"
+ "emacs/" "lib/" "lib/emacs/"))
+ (standard-info-dirs
+ (apply #'nconc
+ (mapcar (lambda (pfx)
+ (let ((dirs
+ (mapcar (lambda (sfx)
+ (concat pfx sfx "info/"))
+ suffixes)))
+ (prune-directory-list dirs)))
+ prefixes)))
+ ;; If $(prefix)/share/info is not one of the standard info
+ ;; directories, they are probably installing an experimental
+ ;; version of Emacs, so make sure that experimental version's Info
+ ;; files override the ones in standard directories.
+ (dirs
+ (if (member config-dir standard-info-dirs)
+ ;; FIXME? What is the point of adding it again at the end
+ ;; when it is already present earlier in the list?
+ (nconc standard-info-dirs (list config-dir))
+ (cons config-dir standard-info-dirs))))
+ (if (not (eq system-type 'windows-nt))
+ dirs
+ ;; Include the info directory near where Emacs executable was installed.
+ (let* ((instdir (file-name-directory invocation-directory))
+ (dir1 (expand-file-name "../info/" instdir))
+ (dir2 (expand-file-name "../../../info/" instdir)))
+ (cond ((file-exists-p dir1) (append dirs (list dir1)))
+ ((file-exists-p dir2) (append dirs (list dir2)))
+ (t dirs)))))
+
+ "Default list of directories to search for Info documentation files.
+They are searched in the order they are given in the list.
+Therefore, the directory of Info files that come with Emacs
+normally should come last (so that local files override standard ones),
+unless Emacs is installed into a non-standard directory. In the latter
+case, the directory of Info files that come with Emacs should be
+first in this list.
+
+Once Info is started, the list of directories to search
+comes from the variable `Info-directory-list'.
+This variable `Info-default-directory-list' is used as the default
+for initializing `Info-directory-list' when Info is started, unless
+the environment variable INFOPATH is set.
+
+Although this is a customizable variable, that is mainly for technical
+reasons. Normally, you should either set INFOPATH or customize
+`Info-additional-directory-list', rather than changing this variable."
+ :initialize 'custom-initialize-delay
+ :type '(repeat directory)
+ :group 'info))
+
(defvar Info-directory-list nil
"List of directories to search for Info documentation files.
If nil, meaning not yet initialized, Info uses the environment
(load "rfn-eshadow")
(load "menu-bar")
-(load "paths")
(load "emacs-lisp/lisp")
(load "textmodes/page")
(load "register")
+++ /dev/null
-;;; paths.el --- define pathnames for use by various Emacs commands
-
-;; Copyright (C) 1986, 1988, 1994, 1999-2012 Free Software Foundation, Inc.
-
-;; Maintainer: FSF
-;; Keywords: internal
-;; Package: emacs
-
-;; This file is part of GNU Emacs.
-
-;; GNU Emacs is free software: you can redistribute it and/or modify
-;; it under the terms of the GNU General Public License as published by
-;; the Free Software Foundation, either version 3 of the License, or
-;; (at your option) any later version.
-
-;; GNU Emacs is distributed in the hope that it will be useful,
-;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-;; GNU General Public License for more details.
-
-;; You should have received a copy of the GNU General Public License
-;; along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
-
-;;; Commentary:
-
-;; These are default settings for names of certain files and directories
-;; that Emacs needs to refer to from time to time.
-
-;; If these settings are not right, override them with `setq'
-;; in site-init.el. Do not change this file.
-
-;;; Code:
-
-;; This is a defcustom largely so that we can get the benefit
-;; of custom-initialize-delay. Perhaps it would work to make it a
-;; defvar and explicitly give it a standard-value property, and
-;; call custom-initialize-delay on it.
-(defcustom Info-default-directory-list
- (let* ((config-dir
- (file-name-as-directory
- ;; Self-contained NS build with info/ in the app-bundle.
- (or (and (featurep 'ns)
- (let ((dir (expand-file-name "../info" data-directory)))
- (if (file-directory-p dir) dir)))
- configure-info-directory)))
- (prefixes
- ;; Directory trees in which to look for info subdirectories
- (prune-directory-list '("/usr/local/" "/usr/" "/opt/" "/")))
- (suffixes
- ;; Subdirectories in each directory tree that may contain info
- ;; directories. Most of these are rather outdated.
- ;; It ought to be fine to stop checking the "emacs" ones now,
- ;; since this is Emacs and we have not installed info files
- ;; into such directories for a looong time...
- '("share/" "" "gnu/" "gnu/lib/" "gnu/lib/emacs/"
- "emacs/" "lib/" "lib/emacs/"))
- (standard-info-dirs
- (apply #'nconc
- (mapcar (lambda (pfx)
- (let ((dirs
- (mapcar (lambda (sfx)
- (concat pfx sfx "info/"))
- suffixes)))
- (prune-directory-list dirs)))
- prefixes)))
- ;; If $(prefix)/share/info is not one of the standard info
- ;; directories, they are probably installing an experimental
- ;; version of Emacs, so make sure that experimental version's Info
- ;; files override the ones in standard directories.
- (dirs
- (if (member config-dir standard-info-dirs)
- ;; FIXME? What is the point of adding it again at the end
- ;; when it is already present earlier in the list?
- (nconc standard-info-dirs (list config-dir))
- (cons config-dir standard-info-dirs))))
- (if (not (eq system-type 'windows-nt))
- dirs
- ;; Include the info directory near where Emacs executable was installed.
- (let* ((instdir (file-name-directory invocation-directory))
- (dir1 (expand-file-name "../info/" instdir))
- (dir2 (expand-file-name "../../../info/" instdir)))
- (cond ((file-exists-p dir1) (append dirs (list dir1)))
- ((file-exists-p dir2) (append dirs (list dir2)))
- (t dirs)))))
-
- "Default list of directories to search for Info documentation files.
-They are searched in the order they are given in the list.
-Therefore, the directory of Info files that come with Emacs
-normally should come last (so that local files override standard ones),
-unless Emacs is installed into a non-standard directory. In the latter
-case, the directory of Info files that come with Emacs should be
-first in this list.
-
-Once Info is started, the list of directories to search
-comes from the variable `Info-directory-list'.
-This variable `Info-default-directory-list' is used as the default
-for initializing `Info-directory-list' when Info is started, unless
-the environment variable INFOPATH is set.
-
-Although this is a customizable variable, that is mainly for technical
-reasons. Normally, you should either set INFOPATH or customize
-`Info-additional-directory-list', rather than changing this variable."
- :initialize 'custom-initialize-delay
- :type '(repeat directory)
- :group 'info)
-
-
-;;; paths.el ends here
+2012-06-27 Glenn Morris <rgm@gnu.org>
+
+ * lisp.mk (lisp): Remove paths.elc.
+
2012-06-27 Chong Yidong <cyd@gnu.org>
* doc.c (Fsubstitute_command_keys): Fix punctuation.
$(lispsource)/isearch.elc \
$(lispsource)/rfn-eshadow.elc \
$(lispsource)/menu-bar.elc \
- $(lispsource)/paths.elc \
$(lispsource)/emacs-lisp/lisp.elc \
$(lispsource)/textmodes/page.elc \
$(lispsource)/register.elc \
projects / emacs.git / commitdiff